设为首页 | 加入收藏

工业齿轮油系列

您所在的位置：首页  »  产品分类  »  福斯润滑油  »  工业齿轮油系列
RENOLIN CKC 150详细说明
<< 返回上一页发布日期：2012-8-15 　　　　已有 人浏览

RENOLIN CKC

High Performance CKC Gear Oils

High Performance CKC Gear Oils

Gearboxes designed for the transfer of power or torque can only perform effectively when excessive wear which can occur at high or fluctuating loads, particularly around the reference circle, is avoided. The life of a gearbox depends on the correct selection of the most suitable lubricating oil. The principal function of a gear oil is not just to lubricate bearings and the gears themselves, i.e. to reduce friction and avoid wear but also to provide protection against corrosion, to cool and to seal. The RENOLIN CKC gear oils contain carefully selected base oils and matched additives to protect machinery from undue wear in especially critical boundary friction conditions. RENOLIN CKC products can be classified as CKC lubricating oils according to ISO 6743-6.

The special characteristics of RENOLIN CKC series lubricants are:

  • High pressure absorption and excellent wear protection
  • Good viscosity-temperature behaviour and excellent low-temperature characteristics
  • Good corrosion protection for steel and nonferrous metals
  • Good resistance to ageing
  • Good compatibility with sealing materials
  • Low foaming
  • Avoidance of frictional vibration by the use of surface-active additives
  • Good demulsification characteristics
  • Multipurpose applications

Application:

RENOLIN CKC series oils are recommended for all industrial applications where the machinery manufacturer recommends the use of a CKC type oil. Highly-stressed bearings, joints, pressure spindles, spur and worm drive gears are reliably, effectively and economically lubricated at temperatures of up to 120°C. The use of these oils guarantees the quiet and smooth running of machinery along with optimum operational reliability. The use of these oils also allows drain intervals to be extended. Please consult our Application Engineers for suggestions on how this series of oils can be used to rationalize oil stocks.

RENOLIN CKC100150220320460680
Lubricating oil type        
acc. to ISO 6743-6 CKC 100CKC 150CKC 220CKC 320CKC 460CKC 680 
acc. to DIN 51 502 CLP 100CLP 150CLP 220CLP 320CLP 460CLP 680 
CharacteristicsUnit      Test method
Colour 2344.555ASTM D 1500
Kinematic viscosity        
at 40 °Cmm2/s94.4145.6214331468690ASTM D 445
at 100 °Cmm2/s11.114.518.524.630.836.8ASTM D 445
Viscosity index 1029896969587ASTM D 2270
Density at 15 °Ckg/l0.8840.890.8950.90.9030.922ASTM D 1298
Flash point, Cleveland open cup°C220225230230240245ASTM D 92
Pour point°C– 27- 24- 21- 15– 12– 12ASTM D 97
Neutralization numbermg KOH/g0.330.330.330.330.330.33ASTM D 974
Saponification numbermg KOH/g1.30.840.840.840.840.84ASTM D 94
Sulphate ash% mass0.10.10.10.10.10.1ASTM D 874
Water content% massnot traceablenot traceablenot traceablenot traceablenot traceablenot traceableASTM D 95
Insolubles% massnot traceablenot traceablenot traceablenot traceablenot traceablenot traceableDIN 51 592
Demulsificationmin< 20< 20< 20< 20< 20< 20DIN 51 599
Foaming,        
seq. Iml< 10/0< 10/0< 10/0< 10/0< 10/0< 10/0ASTM D 892 seq. I-III
seq. IIml< 10/0< 10/0< 10/0< 10/0< 10/0< 10/0ASTM D 892 seq. I-III
seq. IIIml< 10/0< 10/0< 10/0< 10/0< 10/0< 10/0ASTM D 892 seq. I-III
Copper corrosiondegree of corr.1a-100A31a-100A31a-100A31a-100A31a-100A31a-100A3ASTM D 130
Rust prevention pass Bpass Bpass Bpass Bpass Bpass BASTM D 665
Ageing behavior,        
viscosity increase%111111ASTM D 2893
precipitation number increaseml< 0.05< 0.05< 0.05< 0.05< 0.05< 0.05ASTM D 2893
FZG mechanical gear rig testload stage121212121212DIN 51 354-2
Effect on SRE-NBR 1 seal material acc to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,        
relative volume change%777777DIN 53 521 together with DIN 53 505
change in Shore A hardnessShore- 3- 3- 3- 3- 3- 3DIN 53 521 together with DIN 53 505
< 返回工业齿轮油系列
【上一条】：RENOLIN UNISYN CKC详细说明
【下一条】：福斯泰坦自动传动液 ATF 3000详细说明